Skip to main content

✨ GE Top Load Washer - Cycle Dial Doesn’t Work - Easy DIY FIX ✨

Click Here To Order Your New GE Washer Timer Dial
This video shows how to replace a stripped timer dial on the GE washer.
Many times your GE Washer Won’t Spin because the small rubber tube that runs from the tub to the water level sensor is plugged with soap and dirt.  When water can no longer flow in the tube, the timer won’t let the motor go to spin.  The washer thinks there’s still water in the tube that hasn’t yet drained out.  Water is very heavy and if your washer were to try and spin while still full of water it would burn out the motor.

In this video we show how to Easily access the water level tube and how to clear it out.  Right away you’ll have your spin function back.

Just need a paint scrapper and a pointy tool to do this easy repair.  No parts needed.

Labels

Labels:
Location: G328+JJ Turlock, CA, USA

Comments

  1. AnonymousSeptember 23, 2024 at 12:50 AM

    Very Good!!! https://www.pchub.com/acer-aspire-r-15-series-cooling-fan-nc65c03-15l07-p210276

    ReplyDelete
  2. PcHubSeptember 23, 2024 at 12:51 AM

    Very Good!!!

    ReplyDelete
  3. AnonymousApril 9, 2025 at 10:13 PM

    Thank you

    ReplyDelete

Post a Comment

Popular posts from this blog

✨ Whirlpool Washer Door Won’t Unlock - Easy Fix ✨

 ✨  Whirlpool Washer Door Won’t Unlock - Easy Fix ✨ There are a few possible solutions to try if your Whirlpool front loader door won't unlock:  1. Check the wash cycle : Sometimes, the door won't unlock until the wash cycle has completed. This is a safety feature on many front loaders.  2. Check the water supply : Another safety feature is that the door won't unlock if there is still water in the machine. Check the water supply to make sure there is no blockage or interruption.  3. Check the drain pump : If there is water in the machine and the door won't unlock, the problem may be with the drain pump.    Take the drain tube from out of the standpipe in the wall behind the washer and put it into a bucket.    This will allow the water to manually drain out of the washer.    Now that the water is out, the door should open. 4. Check the power supply : If the machine has lost power or is malfunctioning, it may not unlock the door. Try ...
Post a Comment
Read more

✨ Gas Dryer Won’t Heat Up - Easy Fixes ✨

                            ✨   Gas Dryer Won’t Heat Up   ✨ There could be several reasons why your gas dryer is not heating up.    Gas dryers are Easy to fix.    If you have a repair person come out, you’ll probably spend over $150.00.    Using this article you’ll probably spend around $10.00. Here are some things you can check: 1. Gas supply : Make sure that the gas supply valve is open and the gas line is properly connected. You can also check if other gas appliances in your home are working properly. Make sure your gas line is not crimped.    Bad gas flow is seldom the reason for a dryer that doesn’t heat. 2. Igniter : The igniter is responsible for igniting the gas that heats up the dryer. If it's not working, the dryer won't heat. Check the igniter for any signs of wear or damage. If it's broken, it will need to be replaced. Sometimes igniters will glow, but they...
1 comment
Read more

✨ Cold Freezer - Warm Fridge - $25.00 FIX ✨

  Cold Freezer - Warming Fridge - Iced Up If your freezer is cold but the refrigerator is warm, it could be caused by a number of issues. Here are some possible fixes: 1. Check the temperature settings - Make sure that the temperature controls are set correctly for both the refrigerator and freezer compartments. If they are set too high or too low, it can affect the temperature in both areas. 2. Check the door seals - Inspect the door seals to make sure they are clean, free of debris, and creating a tight seal. If the seals are damaged or loose, they can allow warm air to enter the refrigerator compartment and cause it to warm up. 3. Clean the condenser coils - Dust and debris can accumulate on the condenser coils at the back of or underneath the refrigerator, which can cause the refrigerator to work harder and warm up. Clean the coils with a brush or vacuum to improve the efficiency of the cooling system. 4. Check the evaporator fan - The evaporator fan circulates cold air from th...
Post a Comment
Read more