✨ Easy Washing Machine Repairs ✨

By Scott The Fix-It Guy

 ✨ Whirlpool Washer Door Won’t Unlock - Easy Fix ✨




There are a few possible solutions to try if your Whirlpool front loader door won't unlock: 


1. Check the wash cycle: Sometimes, the door won't unlock until the wash cycle has completed. This is a safety feature on many front loaders.


 2. Check the water supply: Another safety feature is that the door won't unlock if there is still water in the machine. Check the water supply to make sure there is no blockage or interruption. 


3. Check the drain pump

Comments

Post a Comment

Popular posts from this blog

✨ Cold Freezer - Warm Fridge - $25.00 FIX ✨

By Scott The Fix-It Guy
Image
  Cold Freezer - Warming Fridge - Iced Up If your freezer is cold but the refrigerator is warm, it could be caused by a number of issues. Here are some possible fixes: 1. Check the temperature settings - Make sure that the temperature controls are set correctly for both the refrigerator and freezer compartments. If they are set too high or too low, it can affect the temperature in both areas. 2. Check the door seals - Inspect the door seals to make sure they are clean, free of debris, and creating a tight seal. If the seals are damaged or loose, they can allow warm air to enter the refrigerator compartment and cause it to warm up. 3. Clean the condenser coils - Dust and debris can accumulate on the condenser coils at the back of or underneath the refrigerator, which can cause the refrigerator to work harder and warm up. Clean the coils with a brush or vacuum to improve the efficiency of the cooling system. 4. Check the evaporator fan - The evaporator fan circulates cold air from the fr
Read more

✨ Whirlpool Washer Door Won’t Unlock - Easy Fix ✨

By Scott The Fix-It Guy
Image
 ✨  Whirlpool Washer Door Won’t Unlock - Easy Fix ✨ There are a few possible solutions to try if your Whirlpool front loader door won't unlock:  1. Check the wash cycle : Sometimes, the door won't unlock until the wash cycle has completed. This is a safety feature on many front loaders.  2. Check the water supply : Another safety feature is that the door won't unlock if there is still water in the machine. Check the water supply to make sure there is no blockage or interruption.  3. Check the drain pump : If there is water in the machine and the door won't unlock, the problem may be with the drain pump.    Take the drain tube from out of the standpipe in the wall behind the washer and put it into a bucket.    This will allow the water to manually drain out of the washer.    Now that the water is out, the door should open. 4. Check the power supply : If the machine has lost power or is malfunctioning, it may not unlock the door. Try resetting the breaker or unplugging th
Read more

✨ Gas Dryer Won’t Heat Up - Easy Fixes ✨

By Scott The Fix-It Guy
Image
                            ✨   Gas Dryer Won’t Heat Up   ✨ There could be several reasons why your gas dryer is not heating up.    Gas dryers are Easy to fix.    If you have a repair person come out, you’ll probably spend over $150.00.    Using this article you’ll probably spend around $10.00. Here are some things you can check: 1. Gas supply : Make sure that the gas supply valve is open and the gas line is properly connected. You can also check if other gas appliances in your home are working properly. Make sure your gas line is not crimped.    Bad gas flow is seldom the reason for a dryer that doesn’t heat. 2. Igniter : The igniter is responsible for igniting the gas that heats up the dryer. If it's not working, the dryer won't heat. Check the igniter for any signs of wear or damage. If it's broken, it will need to be replaced. Sometimes igniters will glow, but they are so worn out that they will not allow the gas valve to open and start the heating process.    A broken
Read more